A pulsing brake pedal on your Mitsubishi ASX usually points to warped or unevenly worn front discs — but heat, sticking calipers and hub runout are often the real culprits.
Here is what to check first, and when it stops being safe to drive.
What a pulsing pedal really tells you on a Mitsubishi ASX
If your ASX shakes the pedal — and often the steering wheel — every time you brake from speed, you are feeling disc thickness variation (DTV) or lateral runout in the front brakes. Rotors rarely warp in the classic sense; what usually happens is that a hot disc picks up uneven pad deposits, or the hub and rotor mounting faces are not perfectly clean, so the disc no longer runs true. Every rotation, the caliper is pushed out and back, and that rhythmic kick travels straight up through the hydraulics to your foot.
- Front discs with DTV or runout — the number one cause, especially on a loaded ASX or one that does a lot of stop-start town driving.
- Sticking caliper slide pins or a dragging caliper — one pad keeps the disc hot, and heat is what creates the uneven wear in the first place.
- Hub or bearing runout, a dirty hub face, or over-torqued wheel nuts — a disc bolted down unevenly will never run true, no matter how new it is.
- Tapered or glazed pads, worn wheel bearings, tired suspension bushes — these amplify the shake and can feel very similar from the driver's seat.