An ABS light that stays on usually points to a wheel speed sensor, wiring, or hub encoder issue.
Here’s what to check first and whether you can safely drive.
Why Your Exeed VX ABS Light Is On
When the ABS warning light stays on continuously in your Exeed VX, the ABS module has stored a fault and disabled the anti-lock braking function. In most cases, the culprit is a wheel speed sensor or its wiring. Each wheel has a sensor that reports speed to the ABS module. If one signal drops out, the module cannot calculate wheel lock-up, so it turns on the light and shuts down ABS, and often traction and stability control too. Common causes include a contaminated or damaged sensor, chafed wiring near the wheel well, a corroded connector, a failed wheel bearing with an integrated magnetic encoder, a cracked or dirty tone ring, low battery voltage, or, less often, an ABS module or pump fault.
