A continuous ABS light usually points to a wheel speed sensor, but wiring, the sensor ring, or brake fluid can also be involved. Here’s how to diagnose it safely.
Why the ABS Light Stays On
When the ABS warning light on your Lynk & Co 02 stays on after startup, the system has detected a fault and disabled itself. In most cases, this is a wheel speed sensor issue, but it can also be caused by a damaged sensor ring, corroded wiring, low brake fluid, or—less often—the ABS control module itself. The good news is that on most Lynk & Co 02 models, each wheel speed sensor is a separate part, so you don't necessarily need to replace an entire hub or assembly unless the sensor is integrated on your specific year and trim. Confirm the exact part and procedure for your vehicle before ordering anything.
